Special PTP-100 E-Type constant spring supports were custom designed to support boiler trim piping for steam generating in an upper thermal power unit. The constants measure 5-3/8″ W x 16-3/4″ L x 23-1/2″ H. They are highly customized to meet the customer’s space requirements and operating method to eliminate the hanger rod from shifting, allowing it to move only vertically while going from cold to hot position. Standard constant assemblies of this size, are about 50% larger and the hanger rod would shift horizontally as the travel reaches the hot position. These constants are designed for loads ranging from 72 lb. to 92 lb. and movements ranging from 10″ to 11-1/2″ downward. Standard load and travel tests were conducted prior to shipment
Live New Webinar
Sign-up for a Live Technical Webinar…
Pipe Support Field Inspection, Installation and Maintenance Webinar
Date: Thursday, January 30, 2025 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real-world problems and see how we were able to solve them with timely and cost-effective solutions.
Upcoming Webinars:
February 6th: Engineered Spring Supports (Practical, Hands-on Approach) Webinar 10:00 am OR 2:00 pm
February 13th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am OR 2:00 pm
February 20th: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits