Blog

These hold-down pipe clamp assemblies are specially fabricated and include wedges with 25% glass-filled PTFE to absorb vibration and also serve as a buffer between the steel pipe and pipe support. Vibration can occur in Power, Solar, Biofuels, and Chemical plants because of flow-induced and/or acoustic-induced vibration due to the flow of fluids or gas/steam through the piping system. Similarly, vibration can occur in pipelines near rotating equipment such as reciprocating pumps and compressors resulting in pulsations or mechanical forces that can occur in both onshore or offshore production facilities. Vibration can be strong enough to cause premature failure or cracks resulting in unplanned shutdowns. These units shown in the photograph are custom-designed for pipe sizes up to 20″ in diameter and temperatures up to 200°F and can be adjusted to accommodate a range of heights for the T.O.S to the B.O.P. They are 21″ wide x 26″ long x 23″ high and are proven to greatly reduce vibration to acceptable levels. These hold-down pipe clamps are fabricated utilizing A 36 carbon steel plate and A 307 Gr. All-threaded rods. All components were hot-dipped galvanized and a quality control inspection was performed before shipment.