These custom heavy duty Fig. 43 yoke u-bolt pipe clamps are designed for a pipeline in Canada. The yoke clamps are designed for 42″ diameter pipe sizes and are fabricated from hot-dipped galvanized carbon steel. They are designed to support a load of 27,500 lb. PT&P supplied a total of 28 assemblies in three weeks for this project. These yoke clamps went through finite element analysis and performance tests prior to shipment.
Read More
Sweco Fab., a division of PT&P, designed and fabricated this 108″ diameter storage tank that will be submerged inside a containment tank for a chemical plant in Texas. The storage tank is fabricated from 1/2″ thick SA516-70 carbon steel and is 240″ in length. The containment water tank measures 295″ L x 124″ W x 128″ H. The storage tank is designed for 100 PSIG at 130°F internally and 15 PSIG at 130°F externally. The storage tank was hydro tested for 1 hour at 150 PSI and a full radiography test was done prior to shipment.
Read More