We designed a total of ninety-four custom adjustable base supports, similar to Fig. 260 adjustable pipe elbow support, to support elbow trunnions in an oil refinery in Indiana. We fabricated these adjustable base supports from carbon steel plates, all-threaded rods, heavy hex nuts and sch. 80 pipes. They will support pipe sizes ranging in size from 1-1/2″ to 12″ in diameter.
Read MoreFor spring cans capable of 40,000 lb. or greater, we recommend you use jacking bolts to remove the travel stops. Visit our visual media section to learn the Solution for Removing Travel Stops at Heavy Loads.
A total of 232 variable spring supports were custom designed for a natural gas processing and separation plant. This project included various spring sizes from PTP-1 30 C-type to PTP-4 160 F-type assemblies. The variables are fabricated from carbon steel, galvanized and coated with a special 3-coat paint system to protect against corrosive byproducts such as sulphur. The F-types include 304 stainless steel and PTFE, 25% glass filled slide plate assemblies.
