Piping Technology & Products, Inc. manufactured 29 insulated trunnions ranging in NPS from 1.5″ to 10″ with the larger trunnion measuring 54″ in height. The trunnions were fabricated from 304 stainless steel with Micarta insulation. They will be used in an LNG plant as insulated pipeline elbows.
Do you see a need for insulated trunnions in your plant? Get pricing today!
The pipe clamps are manufactured from 2″ thick by 10″ wide Chrome-Moly (A387 Gr. 22) bar stock and alloy (A 193 Gr. B7) bolting of 2-3/4″ diameter throughout. They are designed for an operating temperature of 1065°F with a maximum design load rating of 35,000 lb. The pipe clamps will be used to support 24″ diameter pipe in a power plant.
Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!
This custom designed carbon steel constant measures 19 5/8″ wide, by 59 1/2″ tall, by 52 1/8″ long. It is designed for a 500 lb. load with a total travel of 17 1/2″. The support frame was increased in height to meet a large take-off of 59 1/2″. The constant spring will be used to support piping in an oil refinery.
Do you have a need for custom constant springs? Let us price them for you today!
28 sway braces were custom designed from a combination of carbon steel and A-5160 spring steel. Custom design and fabrication was required due to the design loads and movements exceeding the largest standard sway brace assembly. The application required ball joint ends because the angle of incline exceeded the maximum five degree angle. The largest of the sway braces was designed for an operating load of 10,000 lb. with a travel range of 5″ in either compression or extension. Each sway brace was load and travel tested prior to shipping to ensure functionality throughout the entire travel range.
Do you require custom or standard sway braces in your plant? Get pricing today!
