Blog

72" I.D. Cryogenic Insulated Supports for a Project in Algeria
February 16, 2010
72″ I.d. Cryogenic Insulated Supports
72″ I.D. Cryogenic Insulated Supports

PT&P manufactured 72″ dia. insulated supports for temperatures as low as -260°F. The insulation is multi-layered comprised of polyurethane foam with a density of 20 PCF, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel. The shoes will be used to support and insulate piping in a receiving & regassification plant and refinery.

Do you require cryogenic insulated supports in your piping system? Get pricing now!
Request-A-Quote

Read More

Cryogenic Insulated Supports with Acoustic Pads for a Project in Algeria
February 9, 2010
Cryogenic Insulated Supports With Acoustic Pads
Cryogenic Insulated Supports with Acoustic Pads

The operating temperature for these cryogenic shoes ranges from -290°F to 90°F. They are designed for 56″ diameter pipe and are capable of supporting loads up to 40,000 lb. The insulation is multi-layered comprised of 20 PCF polyurethane, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel.

Read More

February 2010 News
February 5, 2010

PT&P is Now Certified with Texas Board of Professional Engineers
Texas Board Of Professional Engineers CertificatePiping Technology & Products, Inc. has been approved for registration with the Texas Board of Professional Engineers.

View Texas Board of Professional Engineers Certificate

In an effort to ensure safe engineering practices throughout the State of Texas, the Texas Board of Professional Engineers has acknowledged that Piping Technology & Projects meets the necessary qualifications to provide professional engineering services and has therefore awarded PT&P a certificate stating its eligibility.

Read More

164 Wide Base Sliding Insulated Supports for a Power Station
February 2, 2010
164 Wide Base Sliding Insulated Supports
164 Wide Base Sliding Insulated Supports

The hot shoes are fabricated from A-36 carbon steel with 304 stainless steel slide plates. The 18″ dia. hot shoe has a maximum vertical load of 5500 lb. and the 24″ dia. hot shoe is capable of loads up to 13,750 lb. All the supports in this project are designed for temperatures of up to 1200°F. In addition to the insulation, these supports are capable of sliding axially or laterally as part of the piping system.

Read More
Top